Description
(FP4322-01L) This corrosion-resistant 3/4 HP Convertible Jet Pump from Flotec is constructed of rugged fiberglass-reinforced thermoplastic to ensure years of dependable service.
Features
- Superior performance at depths to water of 100′ or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230-volt motor – see manual for 115-volt conversion
- Manufacturer’s 1-year limited warranty
| Gallons Per Minute Pumped At Different Depths to Water in Feet |
Press. Shutoff at Max. Depth |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5′ | 10′ | 15′ | 20′ | 30′ | 40′ | 50′ | 60′ | 70′ | 80′ | 90′ | 100′ | 110′ | ||
| Deep Well w/4″ Dia. Casing or Larger | – | – | – | 7.5 | 6.5 | 5.1 | 4.0 | 3.0 | 2.5 | 1.8 | 1.5 | 1.0 | – | 56 PSI |
| Deep Well w/2″ Dia. Casing or Larger | – | – | – | 6.8 | 6.2 | 4.8 | 3.7 | 2.6 | 2.1 | 1.5 | 1.2 | 0.8 | – | 53 PSI |
| Shallow Well of 25′ or Less | 15.3 | 13.8 | 11.8 | 9.2 | 6.8 | – | – | – | – | – | – | – | – | – |
All performances are shown in gallons per minute at 40 PSI discharge pressure
Specifications
- Body Construction: Thermoplastic
- Horsepower: 3/4
- Max. Capacity: 15.3 GPM (shallow well setup)
- Flow at 10′ Lift and 40 PSI: 13.8 GPM (shallow well setup)
- Max. Lift: 25′ for shallow setup/100′ for 4″ deep setup
- Max. Pressure: 52 PSI for shallow/66 PSI for 4″ deep
- Pressure Switch Setting: 30/50
- Suction Pipe Size: 1 1/4″ NPT
- Drive Pipe Size:1″ NPT
- Discharge Pipe Size: 1″ NPT
- Amp Draw (full load): 6.1 amps on 230v/12.2 amps on 115v
- Voltage: 230V/115V, 60 Hz
- Recommended Breaker: 15 amp on 230V/20 amp on 115V
- Max. Water Temperature: 140F (60C)
Reviews
There are no reviews yet.