Description
The Push-In Style Nipple is the ideal poultry and gamebird nipple for both broiler and layer systems.
Features
- Poly with Delrin stainless steel body
- 360° side-action pin
- Sealing components are 100% stainless steel
- Does not require a drip cup
- Water drips easily with any touch from poultry
- Works with gravity fed systems such as a 5-gallon bucket
- Working pressure should be reduced to 1 PSI or less
- Will NOT operate on garden hose pressure
- Vertical mounting ONLY will leak if mounted horizontally
Instructions for Gravity Fed Systems
- Drill holes in the bottom of the sealed bucket with an 11/32″ drill bit, sold separately. [Drill a hole 9.3 mm or 11/32″ or up to 3/8″.] Three holes are suggested, spaced accordingly, for maximum efficiency.
- When installing nipples, place the rubber grommet in the drilled hole first, followed by the actual nipple. A grommet is included with each nipple. Wetting the nipple first eases the application.
- Hanging or fastening your drinker will depend on the location and application. Rope, chain, or cable (sold separately) is recommended.
Note: Each Push-in Nipple includes Rubber Grommet. Grommets can also be purchased separately, QC Part #420012.
Reviews
There are no reviews yet.